Products : ASTAPET

 

ASTAPET^™ B80G15

B80G15 is a 15% glass reinforced alloy of polybutylene terephthalate (PBT) and polyethylene terephthalate (PET) polymer. It has been designed for applications requiring excellent surface finish, and also features high rigidity, high chemical and heat resistance and excellent processability. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astapet™ B80G15-U]. B80G15 is a development grade and the physical properties quoted below are subject to frequent review.

download: product datasheet or msds

 

ASTAPET^™ C70H20

C70H20 is an alloy of of Polycarbonate and Polyethylene Terephthalate (PET) polymer which features high impact strength, high heat resistance, chemical resistance and excellent processability. It is suitable for injection moulding in thin wall sections C70H20 is a development grade. The physical properties reported below are based on limited experimental data and are subject to frequent review. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astapet™ C70H20-U].

download: product datasheet or msds

 

ASTAPET^™ C70L9S

ASTAPET™ C70L9S is an alloy of of Polycarbonate (PC) and polyethylene terephthalate (PET) polymer which features extremely high impact strength, a high chemical resistance, high rigidity and an excellent balance of processability, heat resistance and rigidity. Note: The letter “U” indicates UV stabilisation has been added [ ie: Astapet™ C70L9US].

download: product datasheet or msds

 

ASTAPET^™ MDA277

ASTAPET MDA277 is a 30% glass fibre filled grade of 100% recycled polyethylene terephthalate (PET) polymer. It is designed for applications where heat resistance and high rigidity are required. Mould temperatures of 120 ºC are recommended for achieveing the physical properties quoted below. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astaloy™ MDA277-U ]. ASTAPET MDA277 is a development grade. The typical physical properties are based on limited experimental data and are subject to frequent review

download: product datasheet or msds

 

ASTAPET^™ MDA301

ASTAPET MDA301 is a 35% glass fibre filled impact modified grade of 100% recycled polyethylene terephthalate (PET) polymer. It is designed for applications where heat resistance and high rigidity are required, and higher in impact than standard glass filled PET. Mould temperatures of 120 ºC are recommended for achieveing the heat deflection temperaturesphysical properties quoted below Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astaloy™ MDA281-U ]. ASTAPET MDA301 is a development grade. The typical physical properties are based on limited experimental data and are subject to frequent review

download: product datasheet or msds

 

ASTAPET^™ MDA328

ASTAPET MDA328 is an impact modified grade of polyethylene terephthalate polymer. It has high toughness and good processability. ASTAPET MDA328 is a development grade the results below are based on limited experimental data and are subject to frequent review

download: product datasheet or msds

 

ASTAPET^™ MDA479

Astapet™ MDA479 is an alloy of of Polycarbonate and Polyethylene Terephthalate (PET) polymer which is modified with flame retardant to provide the features of good flame retardcy, high impact strength, high heat resistance, chemical resistance and excellent processability. It is suitable for injection moulding in thin wall sections MDA479 is a development grade. The physical properties reported below are based on limited experimental data and are subject to review without notice in advance. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astapet™ MDA479U].

download: product datasheet or msds

 

ASTAPET^™ PET 70G20L 45001 Black

ASTAPET PET70G20L 45001 Black is a 20% glass fibre filled grade of 100% recycled polyethylene terephthalate (PET) polymer with impact modifier added. ASTAPET PET70G20L45001 is designed for use in structural automotive components. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astapet™PET70LG20-U 45001].

download: product datasheet or msds

 

ASTAPET^™ PET 80

ASTAPET PET 80 is a bottle grade polyethylene terephthalate polymer. It has excellent processability and in amorphous form it has excellent clarity and toughness. The typical values detailed on this data sheet relate to ASTAPET PET 80 in the amorphous form.

download: product datasheet or msds

 

ASTAPET^™ PET70G20L

ASTAPET PET70G20L is a 20% glass fibre filled grade of 100% recycled polyethylene terephthalate (PET) polymer with impact modifier added. ASTAPET PET70G20L45001 is designed for use in structural components where high rigidity is required. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astaloy™PET70LG20-U ].

download: product datasheet or msds

 

ASTAPET^™ PET70G35

ASTAPET PET70G35 is a 35% glass fibre filled grade of polyethylene terephthalate (PET) polymer. It is designed for applications where heat resistance and high rigidity are required. Mould temperatures of 120 ºC are recommended for achieveing the heat resistance properties quoted below. Note: The letters “U” or “W” indicate UV stabilisation has been added [ ie: Astaloy™ PET70G35-U ]. ASTAPET PET70G35 is a development grade. The typical physical properties are based on limited experimental data and are subject to frequent review

download: product datasheet or msds

 

ASTAPET^™ PET90

ASTAPET PET 90 is a bottle grade polyethylene terephthalate polymer containing some recycled material. It has excellent processability and in amorphous form it has excellent clarity and toughness. The typical values detailed on this data sheet relate to ASTAPET PET 90 in the amorphous form.

download: product datasheet or msds